Kolor Autopano Giga 3.0 如何补地?

[复制链接]
查看68947 | 回复27 | 2014-1-7 18:50:49 | 显示全部楼层 |阅读模式

马上注册,结交更多好友,享用更多功能,让你轻松玩转社区。

您需要 登录 才可以下载或查看,没有帐号?立即注册

x
刚看了官网的教程 官网演示的是在 节点处拍摄补地照,但试了一下用斜拍补地,貌似无法补地,求解?还有 Autopano Giga 可以移动补图片到正确的补地位置吗,试了好久没能移动成功。
; }: O% k& y# z6 s" |. P" r4 Y6 V+ z3 K; c+ u% d

, a2 V- z& p* {' q1 u以下是官网的补地方法  N9 G& t; u/ Y
http://www.autopano.net/wiki-en/action/view/Patching_the_nadir/ @: A% ]. E* r* W
HOW IT'S DONEIn a regular panorama
Here is an example of a simple use of an often encountered user case: removing a tripod from an equirectangular panorama.
  z8 [. I8 c1 @5 v3 h7 d0 KThis type of treatment required the use of Photoshop masks, either on the source images, or in post-processing, and in either case this workflow could be rather tedious.
' ~2 _9 k1 s) j( d
Patching_the_nadir_source_images.jpg
& X2 X* t0 L" T5 D
Open the folder of the source images. We can see that they were taken with a fisheye lens and that we have three shots for the nadir. ; u! _) D4 n& s( K  F/ X4 R; z+ ]. z2 ]
Doubling the shot is sufficient in most cases, but here, an extra photo was taken in to be sure to have the coverage to remove the tripod.
0 ?- `2 I7 |/ f- qAfter the stitching, open the panorama editor. ! Z& B2 g3 |" j2 g
Move the panorama using the Move tool, to have the nadir neatly in the center.
760px-Detected_panorama_moved.jpg

$ U0 V+ w' I- zIn the images mode, we can see our three images that have been stitched.
Image_mode_gif.gif

& L2 X% p4 @' V# kActivate the Masking tool, and add a red marker on the visible tripod for each picture, and a green marker on the image without the tripod. Validate the modifications.
! J' Z. t4 a5 ]8 k  y2 h
) j! t) K( I% k2 E
Here is the result using the Preview tool: the tripod has disappeared! 3 clicks were enough to achieve what would have required an average of 10 minutes with Photoshop!
" D) X3 }1 W: d! s; v
760px-Final.jpg 3 Q  P1 `8 m6 |& Q  y( x3 h' H

7 ~. `1 k8 {' ?; C6 e% Z& tIn a partially bracketed panorama
In the case of Partial bracketing, the procedure is the same, except that the panorama contains a bracket.
850px-Partial_bracket_nadir_patch_detected.jpg

  U! |4 h9 I3 b$ Y5 Y3 V% ZUse the move tool to have the nadir in the center.
artial_bracket_nadir_patch_moved.jpg][/url]

+ Y1 S) x; E' \: s& lPlace the red masking points on the tripod and legs, and green on the ground you want to keep.
760px-Partial_bracket_nadir_patch_final.jpg 760px-Partial_bracket_nadir_patch_mask_points.jpg
9 n2 D4 g! u9 y" W. ]& N4 N
This case is a good example to illustrate that the Masking tool doesn't do miracles, and if there is not the sufficient coverage that is required, some parts may remain.
/ L  C' W/ z5 ^8 k+ e6 a! lIn this case: one of the tips of the tripod's leg, none of our images allowed us to cover it completely. 5 x9 i  r0 L2 {; u5 @! f) Q
This minor leftover is easy to edit out afterwards using Photoshop, than if you had to remove the tripod completely using Photoshop.
760px-Partial_bracket_nadir_patch_moved.jpg
, e5 W" V" K; b
Masktool_gif.gif
chinacmy | 2014-3-13 11:04:02 | 显示全部楼层
鱼前辈,我也用这个方法试了,可是进入“遮色版编辑”老是选不中中间补拍的那张,请教具体怎么操作???
鱼眼龙 | 2014-3-13 11:35:37 | 显示全部楼层
chinacmy 发表于 2014-3-13 11:04
+ k; n& u$ X& B鱼前辈,我也用这个方法试了,可是进入“遮色版编辑”老是选不中中间补拍的那张,请教具体怎么操作???

5 C" z8 b8 N5 `5 ~  |! l. P
9 W' `1 J1 Z4 ]; HAutopano 这个软件我手里没有,所以一直也没有研究。
4 g- E, [' L. @; h8 `1 ~; e但我知道在PTGUI里,在全景图编辑器里,工具栏上有“个别图编辑” 和 “整图编辑” 选项,选中个别图编辑,鼠标拖动全景图时,跟着鼠标走的只有被鼠标点中的一张照片。
chinacmy | 2014-3-13 13:11:51 | 显示全部楼层
鱼前辈,我对这个软件不太熟悉,找不到这个选项,麻烦你详细点说明,谢谢!
chinacmy | 2014-3-13 15:16:05 | 显示全部楼层
2.png 鱼前辈,标号13的图片始终选择不了。 1.png 4 `  V7 h) {$ p8 X" s/ ^5 L
chinacmy | 2014-3-13 16:31:58 | 显示全部楼层
鱼眼龙 发表于 2014-3-13 11:35
6 i% k2 z) I- ~& x' Y在全景图编辑器里,工具栏上有“个别图编辑” 和 “整图编辑” 选项。

9 D. C& I/ A) e* _1 U鱼前辈,这个软件有没有详细的使用说明什么的吗?
联横合纵 | 2014-3-14 23:44:46 | 显示全部楼层
可看到chinacmy 用的是忍者
联横合纵 | 2014-3-16 13:43:01 | 显示全部楼层
如今是卖游泳裤的不单要教会游泳,还要教会不同的跳水花式。
联横合纵 | 2014-3-16 14:01:47 | 显示全部楼层
虾米碗糕试了好久没能移动成功,chinacmy 苦苦求索取的问题其实都是同一问题,解决也很简单,在界面最下面那一栏里,把重叠位置不想移动的图去除点选,剩下想移动的图打勾点选便可以了。
9 C2 M+ ]7 j# K( ^. V只拼那么几张图或许无需过多比较,拼矩阵便觉Autopano Giga软件的综合性能比其它软件好,无论是拉直还是优化,能手示区域后便自动寻出大量参考点,手段相当多。
chinacmy | 2014-3-21 11:30:36 | 显示全部楼层
联横合纵 发表于 2014-3-16 14:01& a' ?6 [* C2 O: Y) n2 ]' ^
虾米碗糕试了好久没能移动成功,chinacmy 苦苦求索取的问题其实都是同一问题,解决也很简单,在界面最下面那 ...
6 w- ~$ s% H/ U" F
谢谢前辈的指点!
联横合纵 | 2014-3-21 11:43:44 | 显示全部楼层
这是一个两难选择,游泳裤卖贵了不会有人买,卖低了又不值得不厌其烦的去教。
虾米碗糕! | 2014-3-28 01:31:14 | 显示全部楼层
联横合纵 发表于 2014-3-16 14:01: H6 q' K( F# d# c. A- @
虾米碗糕试了好久没能移动成功,chinacmy 苦苦求索取的问题其实都是同一问题,解决也很简单,在界面最下面那 ...
; d+ A% s4 Y7 R, K9 A- k
非常感谢联版的指点。
chinacmy | 2014-3-30 16:55:56 | 显示全部楼层
各位前辈,我再问一个问题,按照以上方法补地后,只要用“移动”工具把全景图拉直后,“遮色版编辑器”里做的效果全部失效,脚架该出来还出来,不知道我哪步做的还不对?
联横合纵 | 2014-3-30 20:38:51 | 显示全部楼层
我再答你一个问题。遮色板搞完之后,你有沒有在下面做确认?就算你忘了确认,你做其它动作时,软件也会问你是否要保存之前设置。这样都会出错,Autopano Giga软件真的不适合你,后面可用功能还很多,你不可能不厌其烦一直问下去吧。
chinacmy | 2014-3-30 21:21:13 | 显示全部楼层
联横合纵 发表于 2014-3-30 20:38: ?$ x& V0 Z% M& k: w/ @. h
我再答你一个问题。遮色板搞完之后,你有沒有在下面做确认?就算你忘了确认,你做其它动作时,软件也会问你 ...
1 q, j. L; N. V* v' K# X8 @$ A( p1 w$ p
老师你说的“确认”就是绿色的勾吧,如果是那已经点选了,我的问题是把脚架部分移动到画面中心用遮色板操作后输出都正常的,一旦遮色板操作完成把脚架移至画面最下面输出就不正常了,不知何故?
蜡笔蘑菇 | 2014-4-2 14:33:43 | 显示全部楼层
联横合纵 发表于 2014-3-30 20:38
4 b, e6 o7 l! q, j2 d+ g! i, Q( Z! N我再答你一个问题。遮色板搞完之后,你有沒有在下面做确认?就算你忘了确认,你做其它动作时,软件也会问你 ...

6 h/ f( F5 G5 T, ~8 j老师,我觉得您特幽默。。。求联系
联横合纵 | 2014-4-4 14:25:48 | 显示全部楼层
本帖最后由 联横合纵 于 2014-4-4 14:44 编辑
# x8 G- Q4 t+ `5 A" w9 o0 g% B
chinacmy 发表于 2014-3-30 21:21
/ s: [# _5 \' `9 }2 ]. _, {% e老师你说的“确认”就是绿色的勾吧,如果是那已经点选了,我的问题是把脚架部分移动到画面中心用遮色板操 ...
你也够虚心,我也够耐心的了,我现在有点明白你为什么老戴头盔了。/ k2 m, E7 D: I' I8 z" x1 ^. J# }% R
那绿色的勾只是“应用”,你不勾,点选了也不起作用,你不再移动,当然可以完成了。& q: }3 s- R2 }
每做一次改变图的位置移动之前,你先要按一下那个锁要锁着再移动。3 Z/ `4 r  B; s. l* B  Y
ock/unlock selection你看明白了吗?锁定/解锁的选择,后面有个锁。:dizzy:8 U. Y9 Q4 L$ w; h# o

: m) ^' P% [- f" h
) E$ f0 I* S( I5 L  y& z; s+ {
联横合纵 | 2014-4-4 15:35:08 | 显示全部楼层
AutopanoGiga_x64_350_版本己于2014-04-01公佈
chinacmy | 2014-4-4 16:46:52 | 显示全部楼层
蜡笔蘑菇 发表于 2014-4-2 14:33$ F6 c) q. R3 |. `% x4 k. u& ^
老师,我觉得您特幽默。。。求联系

* U2 Z) V2 S0 m/ Q% W0 w! J! d( b呵呵,幽默吗?
chinacmy | 2014-4-4 16:50:32 | 显示全部楼层
联横合纵 发表于 2014-4-4 14:25
8 ^$ O* X' U: X你也够虚心,我也够耐心的了,我现在有点明白你为什么老戴头盔了。- q4 Q2 y: I) _2 v. y% W/ B: H. \
那绿色的勾只是“应用”,你不勾,点选 ...
4 ?  l7 h: {4 u% M/ L" h
呵呵,学习就是要虚心的嘛,这个问题我已经解决了,根本不是你说的,谢谢!
联横合纵 | 2014-4-4 21:23:54 | 显示全部楼层
那就好,终于不用再问了.
蜡笔蘑菇 | 2014-4-19 16:47:39 | 显示全部楼层
chinacmy 发表于 2014-4-4 16:50
. Y$ A$ j3 V$ _! \呵呵,学习就是要虚心的嘛,这个问题我已经解决了,根本不是你说的,谢谢!
) ]% W( X; V3 `
咋解决的?好像我也遇到这个问题了。。。谢谢
chinacmy | 2014-4-28 13:06:18 | 显示全部楼层
蜡笔蘑菇 发表于 2014-4-19 16:47
/ ?) a' u! ^, i9 v' S咋解决的?好像我也遇到这个问题了。。。谢谢
9 w8 n! u  M7 @# v  }6 {
你用什么相机和镜头?
rambler0 | 2015-6-6 21:49:30 | 显示全部楼层
chinacmy 发表于 2014-4-28 13:06
1 P- t: V) T7 K; _/ e$ s7 k你用什么相机和镜头?

( I7 X0 C' l& H. Z5 _% b挖个坟,楼主还在么,我也在寻思这个问题,我用的50D和三阳8mm,请问如何解决的?
捕手是个光头 | 2016-10-24 07:16:50 来自手机 | 显示全部楼层
chinacmy 发表于 2014-3-13 15:16
$ B- L3 ^% q' O3 k6 S鱼前辈,标号13的图片始终选择不了。
4 o# m) r6 E* M. h! B- u
请问老师,这个软件怎么设置2:1的输出尺寸
印象空间VR | 2017-4-11 00:33:28 | 显示全部楼层
航拍图,软件怎么设置2:1的输出尺寸?求解
饼干镜头走天下 | 2017-7-21 13:29:22 | 显示全部楼层
请教大家个问题,我就是遮色版编辑器用不起,我以为他是蒙版功能,按红色圈好多余的人,在按下面的勾,但是人还在?请问怎么用这个功能?
饼干镜头走天下 | 2017-7-21 13:32:22 | 显示全部楼层
chinacmy 发表于 2014-4-4 04:50 PM9 o4 `. P( \( y* S* Q
呵呵,学习就是要虚心的嘛,这个问题我已经解决了,根本不是你说的,谢谢!
0 _1 N& b1 [; B9 C% a
可以给我说说嘛?我也痛苦这个问题,我想去掉多余的人,想用Kolor Autopano Giga 4.0遮色板
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则